This tester is to evaluate the abrasion resistance of low voltage cables for automobiles according to the abrading tape method. Attaching the test specimen so that it touches the abrading tape and then the operator is to abrade the test specimen with the abrading tape at a prescript speed. The abrasion resistance value that is acquired by this method will be the length that the abrading tape abraded before the electric conductor touches the abrading tape.
Specification
No.208（JIS）
| Model | No.208（JIS） |
|---|---|
| Specimen | L900 mm |
| Weight |
Top R114 mm, Initial 450 g, 1,350 g, 1,900 g |
| Electrode | φ7 mm |
| Abrasive Tape |
Material A, Grit #180, Conductive Pitch 150 mm, Conduction W10 mm |
| Tape Speed | 1,500 mm/min |
| Specimen Rotating Angle | ― |
| Counter | 6 Digits Preset Counter |
| Accessory | Abrasive Tape: 5 pcs |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimension/ Weight (Approx.) |
Tester Body: W610 × D290 × H410 mm, 25 kg Control Box: W230 × D310 × H260 mm, 5 kg W620 × D300 × H500 mm, 70 kg(LT) |