» Máy kiểm tra va đập (Tự động hoàn toàn) Yasuda No.258-ZA

This is the fully automatic version of the IMPACT TESTER (Charpy and Izod).
A maximum of 210 impact tests can be continuously conducted just by setting the test specimen to the preparation cassette and inputting the test conditions in the computer software.
The test specimen will automatically come out from the preparation cassette which is located inside the low temperature chamber.
The test specimen will be impacted within 5 seconds after it comes out from the preparation cassette.

Specifications are subject to change without notice.
Temperature Range	-40° 〜 80°(Refrigerator)
Hammer	Capacity 0.5 to 25 J(Charpy),Capacity 1 to 7.5 J(Izod) Automatic Lift-Up Device, Automatic Stop Device
Anvil	Automatic Specimen Setting Device, Rejection Device for Tested Specimens
Test Specimens	70 pcs × 3 Cassettes (Total 210 pcs) *When W10 × T4 × L80 mm, Automatic Cassette Changing Device
Software	Windows Compatible
Option	Hammer Height Adjustment Device (Only for Charpy), Hammer Changing Device (3 Capacities), Low Temperature Chamber, Constant Temperature & Humidity Chamber, Specimen Size Measuring Device, Collect Table for Tested Specimens
Power Source	AC 200 V, 1-Phase, 10 A, 50/60 Hz Low Temp. Chamber: AC 200 V, 3-Phase, 30 A, 50/60 Hz
Air Source	0.5 MPa or More
Dimensions/ Weight (Approx.)	W1,150 × D1,050 × H1,950 mm, 700 kg

Máy kiểm tra va đập (Tự động hoàn toàn) Yasuda No.258-ZA