- Trang chủ
- Products
- Máy kiểm tra độ chịu nhiệt độ thấp YASUDA
- Máy đo độ linh hoạt xoắn CLASH-BERG (Thủ công)/ (Tự động) Yasuda No.170/ No.170-AUTO
Máy đo độ linh hoạt xoắn CLASH-BERG (Thủ công)/ (Tự động) Yasuda No.170/ No.170-AUTO
Chuyen muc: Máy kiểm tra độ chịu nhiệt độ thấp YASUDA
No.170 CLASH-BERG TORSION FLEXIBILITY TESTER (MANUAL)
- This tester is used to measure the softening temperature of plastic.
- The test specimen is to be attached to the upper and lower Chucks of the tester and then dipped into water which the temperature is raised at a constant speed.
- At every 5 °C the water temperature has rises, the operator is to leave the test specimen untouched for 3 minutes.
- After the 3 minutes have passed, twisting torque is to be added to the test specimen so that the rigidity coefficient can be calculated from the twisting angle.
- The softening temperature will be acquired from the temperature-rigidity coefficient curving line.
Specification
| Specifications are subject to change without notice. | |
| Model | No.170 CLASH-BERG TORSION FLEXIBILITY TESTER (MANUAL) |
| Specime | W6.35 ± 0.03 mm, L64 mm, T0.8 to 1.5 mm |
| Chuck Distance | 40 mm |
| Angle Scale |
0 to 360° (Scale 1°) *Max. Angle 270° |
| Temperature Range | -60 to 100 °C (Dry Ice Cooling) |
| Heat-Up Speed | 2 °C/min |
| Torque Device | Pulley Type |
| Weight | 5 g, 10 g, 20 g, 50 g |
| Software | ― |
| Accessories |
Duwar Flask, Thermometer: 2 pcs, Specimen Cutter, Notching Tool, Specimen Setting Gauge |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W300 × D400 × H900 mm, 36 kg |
No.170-AUTO CLASH-BERG TORSION FLEXIBILITY TESTER (AUTOMATIC)
- This tester reads the twisting angle of the test specimen by encoder to calculate the rigidity coefficient.
- The temperature-rigidity coefficient curving line will be displayed on the PC to acquire the softening temperature.
Specimen
| Specifications are subject to change without notice. | |
| Model | No.170-AUTO CLASH-BERG TORSION FLEXIBILITY TESTER (AUTOMATIC) |
| Specimen | W6.35 ± 0.03 mm, L64 mm, T0.8 to 1.5 mm |
| Chuck Distance | 40 mm |
| Angle Scale |
0 to 270° (Scale 1°) Detection: Rotary Encoder |
| Temperature Range | -60 to 100 °C (Dry Ice Cooling) |
| Heat-Up Speed | 2 °C/min |
| Torque Device | Pulley Type |
| Weight | 5 g, 10 g, 20 g, 50 g |
| Software | Windows Compatible |
| Accessories |
Duwar Flask, Thermometer: 2 pcs, Specimen Cutter, Notching Tool, Specimen Setting Gauge |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) |
Tester Body: W320 × D400 × H1,230 mm, 50 kg Control Box: W350 × D460 × H355 mm, 17 kg |