Máy tạo rãnh Yasuda No.189-PN

Chuyen muc: Thiết bị tạo mẫu/ Máy kiểm tra điều chỉnh YASUDA

Lien he

This machine is used to make a notch into test specimens that is required for Charpy and Izod impact tests.
When replacing the notch knife, the notch knife can be independently taken off to realize low running cost.

Specifications are subject to change without notice.
Clamp	Opening Max. 40 mm (Standard: 4 mm × 10 pcs), Feed Speed 1.75 mm/ 1 turn
Cutter Rotation Speed (Approx.)	600 rpm (60 Hz), 500 rpm (50 Hz)
Notch Depth	Manual, Range 0 to 4 mm (Scale 0.01 mm)
V-Notch Cutter	Single Tooth Tip, Outer Diameter φ75 mm, T6.5 mm, Top Angle 45°, Top R 0.25 mm, Material: High Speed Steel (Option: Cemented Carbide)
Option	Pneumatic Clamp, U-Notch Cutter
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions/ Weight (Approx.)	W420 × D525 × H415 mm, 60 kg