Lưu trữ: Products

• Máy đo lực SVZ-200NB IMADA SS (Universal testing machine)

  ■Characteristics ○It is force middle class. The operation is easy due to in the single column UP/DOWN axis. ○The drive type of the ball screw by single axis. ○It can…

• Máy đo lực SVZ-50NB IMADA SS (Universal testing machine)

  ■Characteristics ○It is compact and economical. However, both measurements of load and displacement are possible. ○It can be easily handled by exclusive software. ■Usage example ○The evaluation examinations such as…

• Máy đo lực SV-55BC IMADA SS (Universal testing machine)

  ■Characteristics ○Compared to combinations of Digital Force Gauge and Stand,this testing machine is inexpensive, and it can be measured with simple operation. However, it has the functions according to the…

• Con lăn băng keo Yasuda No.349/ No.349-M

  No.349 TAPE ADHESION ROLLER This tester is to evaluate the tack strength of adhesive tape and adhesive sheet by pressure bonding the test specimen to the testing board. The tester…

• Máy đo lực SDW IMADA SS (Universal testing machine)

  ■Characteristics ○Universal type testing machine from 10kN to 200kN. ○It can be also used for an examination of the small load by adding a smaller load-range. ○The examinations of the…

• Máy xoắn (Máy kiểm tra mức chịu điện áp và mức phá hủy) YASUDA No.199-T

  This device is used for enabling the twistpair method for enamel insulation testing, particularly for the No.199 VOLT-ENDURANCE AND DESTRUCTION TESTER. The test specimen is folded in half, attached to…

• Dụng cụ cắt mẫu hai lưỡi dao Yasuda No.355

  This device is used to extract paper board test specimens for the ring crush test. The operator can easily obtain test specimens by just lowering the lever. Specification Specifications are…

• Dụng cụ cắt mẫu chuẩn Yasuda No.353

  This device enables the operator to exactly extract paper, paper board, and plastic film test specimens for the tensile test. The operator is to cut the test specimen by placing…

• Máy kiểm tra vết lõm dư Yasuda No.184-B

  This tester is to test the residual indentation of floor material. The operator is to apply 356 N of load to the test specimen for 10 minutes (if the test…

• Máy kiểm tra độ lõm Mcburney Yasuda No.184-A

  This tester is to test the indentation of floor material. Adjusting the dial gauge to 0 within 5 seconds after setting an initial load of 9 N, the operator is…