- Trang chủ
- Products
- Dùng cho các kiểm tra lực bóc
- TH-1000N-7/ TH-1000N-20/ TH-5000N-20 Imada
Feature
– Measures adhesion strength of the coating by bonding a test dolly on coated surface and pulling off
[Standards]
– JIS K 5600-5-7 [Testing methods for paints – Part 5: Mechanical property of film – Section 7: Adhesion test (Pull-off methods) ] (corresponding part only)
– ISO 4624 [Paints and varnishes – Pull-off test for adhesion] (corresponding part only)
* See [Specifications] on page 2 for the published year of the standards
Specifications for Surface Coating Pull-Off Test Fixture TH series
| Model | TH-1000N-7 | TH-1000N-20 | TH-5000N-20 | |
|---|---|---|---|---|
|
Upper Part |
Capacity | 1000N | 5000N | |
| Dolly Surface | Round – dia. 7mm | Round – dia. 20mm | ||
| Weight *1 | Approx. 40g | Approx. 90g | Approx. 195g | |
| Mounting screw | M6 | M10 | ||
| Bottom Plate | Center Hole | Dia. 30mm | ||
| Dimensions | See [Dimensions] | |||
| Sample Size | Smaller than 50 x 100 mm | |||
| Accessories |
Upper Part and Bottom Plate, Dolly (10 pcs) |
Upper Part and Bottom Plate, dolly (5 pcs) |
||
| Standards |
Part of ISO 4624(2016) and JIS K 5600-5-7(2014) |
Part of ISO 4624(1978) and JIS K 5600-5-7(1999) |
||
*1 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge.
*2 The published year of conforming standards varies depending on the model.
* Adhesive is not included (Cyanoacrylate, two-component solventless epoxide and peroxide- catalyzed polyester adhesives have been found suitable in most cases).
Dimensions
（Unit:mm）
